How to let showvv command output in size is GB or TB ?

[Chang Che-Lun]

When I use 'showvv' to output all vv,

the VSize column is always in MiB,

how to make it show in GB or TB

CZ1214626Y8 cli% showvv vv1
Id Name Prov Compr Dedup Type CopyOf BsId Rd -Detailed_State- Rsvd(MiB) VSize(MiB)
185 vv1 tdvv v2 Yes base --- 185 RW normal 525 81920
------------------------------------------------------------------------------------
1 total 525 81920

[Ash_7865]

Hi @Chang Che-Lun,

Please try the following procedure to increase the Vsize column from MiB to GB or TB.

SSMC -> Main menu -> Settings -> Capacity Formats -> Edit".

Regards,

[Chang Che-Lun]

can't it just output by cli ?

I mean,if possible, user can user parameter to change the view of there output

[Mahesh202]

Hi Chang

May I request you to refer to the below URL.:
https://support.hpe.com/hpesc/public/docDisplay?docId=a00118637en_us&page=showvv.html

Hope this helps.!!

Regards
Mahesh

[Chang Che-Lun]

It seems not have this parameter about change size unit

[sbhat09]

Hello @Chang Che-Lun,

Default units for CLI outputs is MiB. There is no way to change the CLI output default units.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.