Primera host written space not showing rigth

[CRD]

Good day

Does anyone perhaps know why a Primera array will show a volumes host written space as 100% and when you go check on the OS level it does not corespond to what the Primera GUI is showing?

I am seeing this on 3 volumes and these volumes are in its own application group.

Thanks

[AnilKT]

Hi CRD,

It could be an issue from the host side.

Could you please check if any patch updates are pending on the OS level.
If there are no such updates, please I would recommend you get in touch with the HPE Support team for troubleshooting.

Hope this helps.!

Regards

Anil

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[CRD]

Hi

Problem is not resvoled yet and have opened a case with HPE support team HPE Support Case 5383885213.

They are busy looking into the problem.

Will provide feedback here once resolved.

Thanks

[sbhat09]

Hello @CRD,

That is not a problem. Technically Host written is the 'The amount of space on the storage system that would have been used for host writes if data reduction (deduplication and compression) had not been applied'.
Host written capacity is not something to be concerned about. It can go beyond 100% as well. Thats a not a problem either. It means that Primera's data reduction features saved you 66% of the space from host writes.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.