where will find data-at-transit encryption type in Primera 600

[ejaz_edarat]

Dear Expert,

We have an audit requirement to provide the inofmration of below encryption type

data at rest encryption type

data at transit encryption type

I know the data at  rest encryption value but did not find data at transit encrption type.

Kindly advise em how we can find this.

[ejaz_edarat]

Need urgent your expert advise.

[Cali]

To look into this in more detail, you would first need to know whether the host-to-storage connection is via iSCSI or Fibre Channel.
With FC, the question would be whether the host adapter, switches, and storage support FCP.
For iSCSI, it would be the same question about IPSec.
In (almost) all cases that I know of, however, the storage network is a local-only, isolated network that is already secured using LUN masking, Zoning, or CHAP, which means that additional encryption is not necessary.
LAN and storage networks are simply lumped together here, and "Data in Transit" is usually unnecessarily required for Storage Networks.
Or you just have to explain it properly to them.

Cali

[ejaz_edarat]

Thanks a lot dear.

[sbhat09]

Hello @ejaz_edarat,

This video of StoreOnce may help you here as well. Please take a look:

https://support.hpe.com/hpesc/videoDisplay?videoId=vtc00030134en_us

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.