HPE Community
HPE ProLiant Storage Systems
1825574 Members
708 Online
109682 Solutions
New Discussion

Proliant Storage System F1

 
Biggaloot
New Member

‎10-05-2005 11:57 AM

‎10-05-2005 11:57 AM

Proliant Storage System F1

Grts,

I recently purchased a Compaq Proliant Storage System F1 (Rack mount, 7 8.2gb SCSI drive array). The unit was pulled from a working environment and includes the SCSI I/O board as well as all drives and trays.

I cannot find any documentation on HP's site as to the operation, installtion, or even configuration of this device.

I have a Proliant DL320 with the full PCI slot open and assume there is a SCSI card I can install, with drivers and control software that will allow me to utilize this piece of hardware.

Any help with documentation or hardware/software requirements and configuration would be greatly appreciated. Please e-mail me at: Biggaloot(a)HarrisburgPA.com
0 Kudos
1 REPLY 1
Biggaloot
New Member

‎10-05-2005 12:09 PM

‎10-05-2005 12:09 PM

Re: Proliant Storage System F1

Sorry, it has seven (7) 18.2gb SCSI drives.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.