Deploy error step 36 of 43 : Starting RAID volume configuration

[jneau]

Hello everyone,
I need to deploy a new DL380 Gen11 node in an existing 5.2 federation. During deployment, there is the error “DeployStatus(status:ERROR, detail:ERR_DPLY_TIMEOUT_WAITING_FOR_PHASE, message:Step 36 of 43: Time out occurred while waiting for phase - Deploy phase 2 complete - last status: Starting RAID volume configuration)”. I also tested the factory restet with the image to restart a new deployment, same error.
The new omnistack vm deployed carries the HPE SR932i-p Gen11 card in passthrought mode and well detected by Vmware. Any ideas?

Thanks a lot,

Julian,

[Kipp_Glover]

Hi Julian!

It would be best to open a case and include the /root/firstboot logs.  If you examine the SR932i controller status in iLO, what do you see (please take a screenshot)?  Please let me know the case number so I can follow along.  

Cheers!
/Kipp

[jneau · Accepted solution]

Hi Kipp,

Thank you for your reply,
I solved my problem by reinstalling the firmware of the SR932i raid card with version 03.01.30.106. Deployment has continued successfully.
Have a nice day,

Julian,

[Thaufique_Mod]

Hello @jneau,

That's great! 

Happy to hear you were able to find the solution and we appreciate you for keeping us updated.