simplivity can not create new vm, clone and backup

[sarwoedi]

I can not create a new vm, clone or backup on simplvity but all vm's are still running

I have 2 cluster vm, eventhoug I create a new vm on other cluster or other storage, still error with the message 

"unable to access file ds :///vmfs/volumes/dbd3f6xxxxxxxxxx

simplivity version is 3.7.3 and HPE gen9 and gen10

Please advice

Thank you

sarwo

[gustenar]

Hello @sarwoedi, 

It looks like you have problems accessing storage. I would start making sure your OVCs are fully functional and that the storage network is up and running. Make sure the datastores are mounted in both hosts and accessible. 

Using putty to connect, from the OVC you could try the following commands: 
`svtfs status` --> run it on both OVCs. 

`ifconfig` --> Make sure "eth2" interface has an IP assigned. 

From the ESXi host run "esxcli storage nfs list". 

Have you also looked for hardware issues like failed disks? Try `svt-hardware-show`