Simplivty 3.7.4 fourth node installing

[sampiyonts]

Hello,

When we try to add 4. simplivity node to our cluster, we take error 

2019-07-01 15:35:45,842Z ERROR OmniStack-10.1.150.14 [c.s.d.o.Orchestrator] error(DeployLogger.java:98) - step 11 of 30 (35.93%) - Failed to configure management network - Could not find management network switch vSwitch1

[KGman]

Hi @sampiyonts,

Usually when we see this type of message it has to do with the default network settings being changed or the non-standard vSphere port-groups being configured. Have you been deploying these four nodes in succession or is this a 4th node being added to an existing cluster.

It would probably be best if you open a support ticket to track and troubleshoot this deployment issue further to come to a quicker turn-around time.

[tpaulat]

Hello,

did you remove vSwich1 after deployment of the previous nodes and consolidated everything on vSwitch0?

In this case please just create a vSwitch1 on the other nodes (it can be empty) and try again to deploy. Sounds like deployment installer is looking for vSwitch1 of the previous deployments and cannot find it.

[sampiyonts]

Hello,



I removed vswitch0 after deployment the previous switch

And consolide all nodes with vswitch1

Also when installing node4

Created new empty vswitch0 the other nodes but still failed again