Upgrading from HPE Omnistack 3.7.6.157 to 4.1.0

[JL120283]

Hello,

Grateful if anyone can help. Is it possible to upgrade directly from HPE Omnistack 3.7.6.157 to HPE Omnistack 4.1.0?

Or do we to go through the versions prior to 4.1.0 first?

Thank you.

[TLaursen]

Hello ... 

According to the 4.1.0 Interoperability guide it should be possible, but depends on your Simplivity Model - there are some limitations - but you can check supported upgrade paths below :

 Happy Upgrade

B.R. Thomas !

[JL120283]

Hello TLaursen

Thank you for your quick reply. There are actually 5 nodes DL380 Gen10 that need to be upgraded to 4.1.0 in order to match the same firmware of 2 additional DL380 Gen10 G nodes to be added to the cluster. So do you think a direct ugrade can be done here please?

[sudhirsingh · Accepted solution]

Hi,

You should upgrade to 3.7.9 first.

Please refer the interoperability guide
https://support.hpe.com/hpesc/public/docDisplay?docId=a00099036en_us
For HPE SimpliVity 380 Gen10 G, there is no upgrade path prior to HPE OmniStack 3.7.8

Direct upgrade from OmniStack 3.6.2 to 3.7.10 or later is not supported. User has to upgrade to OmniStack 3.7.9 before upgrading to OmniStack 3.7.10 or later.
For details related to upgrade paths and compatibility, 
see the Hypervisor Interoperability and Firmware Interoperability tables.

Consider checking VMware vCenter Interoperability and 
Hypervisor Interoperability (VMware vSphere)

Regards,

Sudhir

[JL120283]

Hello Sudhirsingh, 

Thank you for these infos.