I am unable to connect SN2010 Switches via 10GbE MM SFPs.

[Asitha]

I have newly bought SN2010 Switches try connect two switches via 10GBE MM SFPs. Seems Link not power up with multiple good OM4 Patch Leeds. Also feel Switch not detect SFP those came from HPE orignial SFPs

[Cali]

Hello Ashita,

from my experience, these switches accept pretty much any SFP.

Have you also configured the ports accordingly?

Roughly like this:

enable
config terminal
interface ethernet 1/1-1/18
shutdown
speed 10G
no shutdown
exit
show interfaces ethernet 1/1
q

Cali

[Tim Brumbaugh]

By default I believe they are set to 25gb on the interfaces, and you must set them to 10gb if you are using 10gb optics or dacs.