How to Remove License Interconnect Module Hpe Synergy

[Yosep1]

Hi All,

I have a problem inserting 2 ICM licenses into one frame, the two licenses should be for 2 frames, so I wan to remove for second license.

Thanks.

Regards,

Yosep Purnama

[support_s]

System recommended content:

1. HPE OneView 3.0 Release Notes for HPE Synergy

2. HPE Synergy Grow Best Practices

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[support_s]

Greetings!
Please refer to the userguide below:
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001378en_us&page=GUID-D7147C7F-2016-0901-066E-000000001765.html

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00005729en_us&page=GUID-D7147C7F-2016-0901-066E-000000001773.html

[shiva_jr]

Hi @Yosep1 ,
    I am not sure, but if I recall, just check is it possible by following steps-

a.  First, check to which ICM, the second license is assigned.
b.  Remove logical interconnect groups if any, and remove Interconnect from enclosure.
c.  In Appliance - Licensing, identify the 2nd license and make it deallocate or removed.

Regards,
Shiva_jr

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".