HPE Synergy 12000 Frame expansion from 2 to 3

[daliborazure]

I would like to expand 2 synergy frame enclosures with another one. I know about connecting cables L3 and L4 from master Interconnect to satelite. Add the frame first then ensure that One View can see it but what about firmware. We just update firmware on a new satelite modules 

[support_s]

System recommended content:

1. HPE Synergy 12000 Frame Site Planning Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Rakesh0404]

Hi, Please find the below documents on the upgrade and the firmware. 

Using the current Template to configure the new frame and the same firmware version would be applied. 

Link -https://support.hpe.com/docs/display/public/synergy-sw-release/Upgrade_Table.html 

Link - https://support.hpe.com/techlib/docs/synergy/shared/ts/GUID-EDF9AB78-49D2-46A7-A903-31E1AFD39B6A.html 

Link - https://support.hpe.com/hpesc/public/docDisplay?docId=c05348284 

[Rakesh0404]

Hi , We wanted to follow up and check if the steps provided to you addressed the issue. Request you to please respond with a Yes/No. You may also click on "Accept as a solution" button if the issue is resolved.