HPE Synergy Network Configuration

[pranish]

so i have one synergy 12000 frame 

1)  created Network with 3 VLANs, say 215 ,101 and 173  type ethernet and tagged

2) created network sets called VLANS added all 3 vlans in the set 

3) Created LIG and added uplink as Q1:1 , Q1:2 Q1:3 and Q1:4 and added the network set as networks 

4) Created Enclosure group and selected the Virtual connect 40gb f8 module 

5) Created Logical Enclosure 

everthing seems fine and health conditions are good 

6) Created Server profile Template 

7) Assigned 3 networks to Mezzanine 3:1a , 3:1b and 3:1c

i cant pint the IP set on 3:1a from outside of the network 

IS there something i am missing ?

[naveenkumarb]

Are you not able to ping only 31:a? and able to ping 31:d and 31:c?

Is the external switch configured where the uplinks are connected?

Please log a ticket with installation team for further troubleshooting.

Please provide the complete toplogy to understand better.

[Shakedown1979]

Agreed would need some more details, but if it is possible to reach the other interfaces apart from "a" then it might simply be the uplink port config. Would need to know more details of the uplinks I think to be able to help.

[Kiswagara]

Sir, Did you get a resolution on your issue? I am facing the same issue in my environment