Virtual Connect SE 100Gb F32 Module ports

[CRD]

Good day

Virtual Connect SE 100Gb F32 Module

Want to know if its possible to use the below VC ports similtaniously or can you only use either the QSFP28 (Q) ports or the SFP+ (X) ports?  Not both connected similtaniously.

Below is how we would like to connect the ports if possible

QSFP28 port - Q1 = use for uplinks to core using XCVR adaptor and MPO cable

SFP+ ports - X1 & X2 = use for iSCSI traffic using DAC cables

Any advice will be appreciated

Thanks

[support_s]

System recommended content:

1. Virtual Connect SE 100Gb F32 Module for Synergy - Uplink ports flapping

2. Advisory: HPE Virtual Connect SE 100Gb F32 Module for Synergy - Unexpected Reboot May Occur Due to Flapping Uplink Ports

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[tech3d · Accepted solution]

Please follow this user guide :

HPE Virtual Connect SE 100Gb F32 Module for Synergy

https://www.hpe.com/psnow/doc/a00067745enw?jumpid=in_lit-psnow-red

For this interconnect module. we have the following ports :

Q1 to Q6 - for up-links : dual personality (Ethernet & FC SAN) depends on type of SFP used

Q7 & Q8 - reserved for stacking the 2x redundant interconnects

X1 & X2 - reserved for Image Streamer connections.

Ref page 2

For compatible QSFP28 transceivers, DAC & AOC options see page 11 onward.

[Sunitha_Mod]

Hello @CRD, 

We do see you have marked the reply as solved. We are glad to know your concern has been addressed.