SNMPv3 Authentication Protocol on IRS only SHA not SHA512

[MarioE]

I use SANnav for my SAN Switch. I also have the SAN Switch in HPE Insight Remote Support to automatically open cases from the SAN Switch.  I monitor it via SNMPv3 traps.
I performed a FOS update to version v9.2.1c on my G720 SAN Switch via SANnav. The following warning appeared:

Currently, however, I can only select SHA for the SNMPv3 protocol on the IRS and not SHA512:

Is there an IRS update where I can select SHA512, or what do I need to configure here so that I can receive traps from the SAN Switch in the IRS in the future?

SANnav: 2.4.0a
SAN switch: v9.2.1c
IRS:
Software version: Insight Remote Support 7.15.0.0646
Content level update version: 7.15.0.654