An I/O device (or host bridge) detected a bus parity error

[Akbarmoazam]

Dear,
I face with critical error in rx3600 server,in HP-UX 11.31
This server priodically reboot and when i search in event logs I face with these event ides:

You can see logs in event on sam browser in the attachment.
Would you please help me about solving this problem.
Best Regards,
Akbar

[Torsten.]

PCI parity error detected. - could be a bad HBA or even a bad system board. Consider to call HP for help.

[Sameer_Nirmal]

The PCI IO bus parity error could be caused by a bad PCI/X card in a slot and/or with the associated LBA on the I/O board. The physical location is given in the event log. Contact HP support along with the output of the following command. You may post the output here if you want but for immediate response contact your local HP support.

# evweb logviewer -E -r -i 3401

[Akbarmoazam]

Dear,
Output of thi command is:
ebs1:/root $evweb logviewer -E -r -i 3401


Low Level Log Details
=====================
Log Id : 3401
Log Index : 0
Log Source : fpl
Log Type : fpl.e0
Log Version : 1
Device Id :
Device Type : System Hardware
Hardware Physical : 0-0-0-0-0-0-0-0
Time of occurence : Tue Feb 23 2010 13:01:07
Buffer
0000000 7001 e000 6902 8064 83ff 4ff ffff ffff
0000010
ebs1:/root $

Is there Hardware problem on this system or software problem?

Best Regards,
Akbar

[Akbarmoazam]

Hi,
Any boady is there,We are argent problem in Here,
Best Regards,
Akbar.

[Dennis Handly]

>We are urgent problem in here

As Torsten said, if it is urgent, you should be contacting HP Support. After 4 days, it doesn't seem that urgent.