HPE Community
Integrity Servers
1849243 Members
6208 Online
104042 Solutions
New Discussion

Re: CPU replacement in RX5670 server!

 
GODPHREY SOSTHENES
Occasional Contributor

‎03-09-2004 09:42 PM

‎03-09-2004 09:42 PM

CPU replacement in RX5670 server!

Hi Guyz! I have done a swapping of CPUs in Itanium RX5670.I replaced the 1GHz CPUs with the 1.3Ghz CPUs.The server has HP-UX 11.22,I performed all the required steps,including the installation of the patch PHKL_29425.The problem am having now is that the system can not define the CPU model.If I do the machinfo,the CPU model is unavailable.What could be the problem??
0 Kudos
Reply
3 REPLIES 3
Eric Watson_2
Advisor

‎03-11-2004 08:51 AM

‎03-11-2004 08:51 AM

Re: CPU replacement in RX5670 server!

Hi,

What firmware revision are you on?? You need to be on system firmware rev 03.21 minimum. You can check it on by logging it to the MP and entering the CM mode. Then execute the sysrev command.

Eric
0 Kudos
Reply
GODPHREY SOSTHENES
Occasional Contributor

‎03-11-2004 04:53 PM

‎03-11-2004 04:53 PM

Re: CPU replacement in RX5670 server!


Thanx for the reply Eric.I have attached you the machine info.That you can see all the firmware revision.
0 Kudos
Reply
Vincent Farrugia
Honored Contributor

‎03-11-2004 09:57 PM

‎03-11-2004 09:57 PM

Re: CPU replacement in RX5670 server!

Hello,

I can see that you are on revision 03.11 and not 03.21. Please upgrade firmware to the suggested one.

HTH,
Vince
Tape Drives RULE!!!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.