How to check firmware version

[Musa I. S.]

how do i check the firmware version on my rx7640 server.

how do i upgrade to the latest version

[Torsten.]

You are in the wrong sub-forum - this is about storage.

Anyway, run this from the MP and post the result:

MP:CM> sysrev

[Torsten.]

Latest is

VERSION: rx8640/rx7640 and SEU (AB301A) Firmware Version 4.0


Programmable Hardware:

System Backplane GPM : 001.002.000
System Backplane EMMUX : 001.000.000
PCI-X IO Backplane IO_LPM-0 : 001.004.000
PCI-X IO Backplane IO_LPM-1 : 001.004.000
PCI-e IO Backplane IO_LPM_E-0 : 002.003.000
PCI-e IO Backplane IO_LPM_E-1 : 002.003.000
Core IO CIO : 001.002.000
Cell_LPM : 001.002.000
Cell_JTAG : 001.002.000
Cell_PDH : 001.005.001
Firmware:

Core IO MP : 003.001.002
Core IO ED : 002.008.000
Cell PDHC : 023.003.040
Cell IPF_FW : 009.022.000


see

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1844075&swItem=ux-55338-2&prodNameId=1844076&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=1

[Vihang. · Accepted solution]

Hi Musa,

You can check the firmware version from the MP.

MP> --> CM> --> sysrev

This will show you your current firmware version. There are multiple ways to upgrade it. The way I prefer doing it is through the HP-UX patches which can be installed using swinstall to upgrade all the firmware.
You can find the firmware on below location.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1844076&prodTypeId=15351&prodSeriesId=1844075&swLang=13&taskId=135&swEnvOID=2080#290


Best Regards,
Vihang.

[Musa I. S.]

Interprete the attached pls.

[Torsten.]

You have only version 2 installed.

Meanwhile there should be a bundle version 4.1 - consider to ask HP support for help if needed.

[Musa I. S.]

ok thank you.