How to Get IP Console

[ndra]

I Have rx5670 and i want to see server Logs via MP. I only see MAC Address for RJ-45 MP Port ?

How to get IP Address Console. or Step by step to login console Via LAN ??

Thanks

[Matti_Kurkela]

First connect to the local console using a serial cable.

Press Ctrl-B to access the MP menus.

(Depending on the MP version, you may have to login and/or use the CM command to enter the Command Menu at this point. The factory default MP username/password is Admin/Admin.)

Type "LC" to access the MP's LAN Configuration.

Setup the MP LAN configuration to your requirements. (Setting up the MP usernames & passwords is also recommended at this point.)

Connect the LAN cable to the MP's RJ45 port.

Verify you can connect to the MP using the IP address you configured.

Exit the MP menus on the serial connection and disconnect the serial console cable.

Now you have a working MP console over LAN.

MK