MP Login

[kunjuttan]

Hi
How can I able to do MP login?My server is ia64 hp server rx3600.

[Dennis Handly · Accepted solution]

On the console just type control-B.
Otherwise do you have the MP on a LAN connection?

[Hakki Aydin Ucar]

Hi,

You probably should have an IP for remote connection as Denis stated. and you just try to telnet to MP, by default userid / password must be Admin/Admin.

[kunjuttan]

thanx..Can you please give me the detailed steps

[Anshumali]

This should help:

http://docs.hp.com/en/AB463-9003C-ed6/ch03s07.html

Cheers!
Anshu

[Jeeshan]

As stated above, connect through telnet if IP configured or connect through serial port using hyper terminal.

Then use default user/password as Admin/Admin and in MP console type he (for help) to see the list of available command and its usages.

[R.O.]

Hi,

# telnet
# insert user/passwd (usually admin/admin)

Now you are logged into the console.

Regards,

[S.N.S]

But remember, Telnet is not secure...
Check out the security options
MP>CM>SO

You would be able to disable Telnet from there.

HTH
SNS

[Suraj K Sankari]

Hi,

>>How can I able to do MP login?My server is ia64 hp server rx3600.

Here is the link where you can find how to use MP or GSP ..
http://docs.hp.com/en/B2355-90702/ch02s07.html

Suraj

[Benoy Daniel]

Initially you need to set the MP IP using local console. You may not able to get into through your local network using factory default.