Npar basics for VMS on Integrity

[Jay Tarler]

Hi,
Where can I find (online) the basic instructions for creating npars on an Integrity system for use with VMS 8.3 OS?

Thank you

Jay Tarler

[Torsten.]

Hi Jay,

start with this:

http://docs.hp.com/en/5991-1247B_ed2/index.html

[Duncan Edmonstone]

Jay,

Here:

http://docs.hp.com/en/5991-1247B_ed2/index.html

And specifically here:

http://docs.hp.com/en/5991-1247B_ed2/ch05s10.html

HTH

Duncan

[Jay Tarler]

Thanks, Torsten and Duncan.

I reviewed these links and found several ways to create the npartitions. One thing I did not find, and please let me know if I missed it somewhere, is a way to create or modify an npar from within OpenVMS, as can be done from within HP-UX (parcreate, parmodify, etc).

I am assuming that I have to either load HP-UX or Linux or Windows on a system and use the Enhanced nPartition commands, or create a Windows-based management station using Partition Manager. Only then can I install OpenVMS on the partitions that I created.

Is that correct? Thanks

Jay

[Torsten.]

"or create a Windows-based management station using Partition Manager"

This would be your solution.