problem with mp port rx8640

[pedliz11]

we had a problem with an mp port --could not access via ip or serial connection.. We had to power down the whole server with all of it's vpars to reset this port.. Is there any firmware upgrades that fix this? and or patches? pl let me know n Thanks for your help

[Jeeshan]

just power up the server. not to start server. then try to connect to MP with serial cable.

[pedliz11]

tried that did not work

[Steven E. Protter · Accepted solution]

Shalom,

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductRoot.jsp?lang=en&cc=il&taskId=135

If there is firmware for your box it should be installed regardless of this problem.

I suspect the MP port is dead. Hardware issue. Contact HP support for replacement. these things do happen once in a while.

SEP

[Jacques Carriere]

Any green lights on the MP adapter? If not, you may have a problem.

The following command might help...

#stty +resetGSP

Jacques

[pedliz11]

everything worked