Raid-0 On Rx2660

[Aneesh Ganapathiyil]

I am working on a RX2660 Server, Having two internal SAS Disk of 72GB. Customer needs to use both disk individually and needs to install HP-Ux 11.31 Pref and HP-Ux 11.31 Debug on respective disks. I tried with drvcfg -s command on EFI Shell. But there is no option to configure raid 0.

Is there any other way to seperate these two disk and install HPUx 11.31 on each disks.

Please help ....

[Kranti Mahmud]

Hi Aneesh,

rx2660 use intgerated RAID which is inbuild. For usig two HDD separately or as RAID-0, you need to remove the IR. For more details check chapter 3 of this manual:
http://docs.hp.com/en/J6369-90045/J6369-90045.pdf
http://docs.hp.com/en/netcom.html#SAS%20Host%20Bus%20Adapters

Rgds-Kranti

[Aneesh Ganapathiyil]

Hi Kranti

Thanx a lot. I disable Raid and installed HPUx on both the disks. Thanx a lot.

[Aneesh Ganapathiyil]

I got succeed..

[Kranti Mahmud]

Hi Annesh,

You should assign points to make one enthusiastic for future replies.

Rgds-Kranti