Superdome 2 IOX Enclosure Numbering

[Nosaj]

Hello,

I need to build two Superdome 2 with four IOX boxes each. I have mostly IOXs labeled 9 and 10. I connected two 9s and two 10s and the dome only saw whichever two that booted first. It never saw all four.

I was able to get ahold of an 11 and a 12 and now it is able to see all four, but I’m not sure if I’ll be able to find other IOXs labeled 11 and 12 for the other dome.

Is there a way to renumber the 9s and 10s I have to 11 and 12?

Thanks for any help you can provide!

Jason

[Hawkeye · Accepted solution]

Hi Jason,
There are DIP switches on the IOX controlling its address.
Change these to match your 11 & 12 IOX chassis.
Regards

[Nosaj]

Thank you! I looked everywhere on the IOX boards but I must have missed them.