HPE Community
Integrity Servers
1849251 Members
4432 Online
104042 Solutions
New Discussion

Re: WARNING [42]

 
The Brit
Honored Contributor

‎06-23-2008 07:39 AM

‎06-23-2008 07:39 AM

WARNING [42]

When I power up or reset my rx3600 I get the following message.

WARNING [42] CPU's with different core frequencies installed.

This is a 2 processor (4-core) system, running OpenVMS 8.3. Processor 1 (CPU/Core's 0/1) has speed 1.418 GHz, and Processor 2 had speed 1.398 GHz.

Is this anything I should be concerned about, (either the warning message, or the mixed frequencies)??

Dave.
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

‎06-23-2008 07:43 AM

‎06-23-2008 07:43 AM

Re: WARNING [42]

Please go to the EFI shell and run

Shell> info all

Post the result.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The Brit
Honored Contributor

‎06-23-2008 08:37 AM

‎06-23-2008 08:37 AM

Re: WARNING [42]

Attached.

Dave
0 Kudos
The Brit
Honored Contributor

‎03-25-2009 07:43 AM

‎03-25-2009 07:43 AM

Re: WARNING [42]

System actually had mismatched cpu's
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.