Caller ID configuration

[calama]

Hi All



I have a VCX V7.2 installed on IBM System i and today all phones are presenting the same number to the called party as follow (+33 1 41 01 11 11). Actually, I have sufficient DDA to attribute for certain phones.



In other words, I want to configure certain phones (extensions) to present their DDA. For example for (DDA = 1234) attributed to (extension = 1150), the presented number to the called party will be (+33 1 41 01 12 34) when a user uses him phone with (extension = 1150)



I don’t know where and how could I perform this case



Any one can help me ?



Thanks’ in advance

[Ed Holt]

You could make a number translation in AUTH. for example.ext 1150 needs to present +33 1 41 01 12 34



you create a pattern for both digit strings then create a translation where the source is the extension the resultant source is the full did destination is telco (9*) result dest remains teloco (9*). this will present out the DID to the gateway only not internal.

3Com Certified IP Telephony VCX/NBX Expert

[calama]

I have performed this issue according your recommandations and All It work fun.



Thanks' vcxguru68