2920-24G routing protocol.

[Carva]

Hi Sir,

I would like to use a 2920-24G to deploy OSPF & RIP protocol.

May I know if do you have an example scenario of document to refer to?

Thanks.

C.

[akg7]

For OSPF
++++++++
ProVision(config)# ip router-id <router id>
ProVision(config)# router ospf
ProVision(ospf)# enable
ProVision(ospf)# area backbone
-or-
ProVision(ospf)# area 0.0.0.0
-or
ProVision(ospf)# area 0
ProVision(ospf)# vlan <vlan number>
ProVision(vlan-num)# ip ospf area backbone
-or-
ProVision(vlan-num)# ip ospf area 0.0.0.0
-or-
ProVision(vlan-num)# ip ospf area 0
ProVision(vlan-num)# router ospf
ProVision(config)# vlan <vlan number> ip ospf area backbone
-or-
ProVision(config)# vlan <vlan number>  ip ospf area 0
-or-
ProVision(config)# vlan <vlan number>  ip ospf area 0.0.0.0

For RIP
++++++++

ProVision(config)# router rip
ProVision(rip)# enable
ProVision(rip)# vlan <VLAN number> ip rip