few commands for ProCurve J8697A Switch 5406zl (Software revision K.15.03.0005)

[JitenShah]

Hi,

     I need few commands for  ProCurve J8697A Switch 5406zl (Software revision K.15.03.0005)  -

1. to view forwarding table (FIB) [??]

2. to view all IP addresses configured on the box [show interfaces brief ??]

3. to view routing table (RIB) [show ip route ??]

The thing is I need to parse the output for these tables and I do not have access to the router. I need to find these commands and share it with our networking team.

I did find the commands but I am not sure if they are the ones I shall be using . It will be great if some once could help confirming.

thanks,

Jiten

[paulgear]

You can find all the commands you're looking for in the manuals: http://www.hp.com/rnd/support/manuals/5400zl.htm

[JitenShah]

Thanks Paul for the link but I could not still find command to view forwarding table.

I found one command called "debug ip fib" but no command to view that table.

I am looking for a table which  ProCurve J8697A Switch 5406zl uses to make the forwarding decisions.

[Vince_Whirlwind]

show mac-address displays the ports frames will be forwarded out.

[paulgear]

Another helpful document might be the HP/Cisco CLI reference guide:

http://h17007.www1.hp.com/docs/interoperability/Cisco/HP-Networking-and-Cisco-CLI-Reference-Guide_June_10_WW_Eng_ltr.pdf

https://h30590.www3.hp.com/product/HP+Networking+and+Cisco+CLI+Reference+Guide+-+Version+2-Paperback-8409