Help with VLAN Setup - Two HP switches

[johndotcom]

Hi - I am trying to setup two wirless VLANs on my home network.  I would like advice on the switch configuration, or confirmation that I have set it up correctly as the setup is not working and I am attempting to localize the issue.

Equipment: 

• Wifi AP:  UniFi AP-nano HD: Three networks setup: Base (no/default VLAN), GUEST (VLAN 40), IOT (VLAN 50)
• The AP is connected to HPE 1820 8G (J9979A)

Port 1 - hardwire back to HPE 1920-24G (JG924A) - main system switch

Port 2 - Apple TV

Port 3 - UniFi AP -- VLAN tagged by AP per network

Port 4 - Sonos Connect 

Port 5 - Yamaha AVR - this traffic should go on VLAN 50

Here are the 1820 Configuration Pages

The HPE 1920 is the main switch on my system.

Port 1 is connected to a Netgate SG3100 Router/Firewall with pfSense 

Port 22 is the connection from the 1920 to the 1820

Other ports are to W10 PC, Printer, another 1820, etc - all non-VLAN devices

Here is the 1920 Configuration:

On the screenshot below, I just listed ports 1 and 22, all other ports not listed are same as 2 & 3:

I've read configuaration sections of both 1820 and 1920 manuals but this is my first VLAN setup.

Any assistance would be appreciated.

[johndotcom]

Update: I found a problem with my NAT rules in pfSense, which was preventing WAN/Internet access.  Once fixed, everything seems to work correctly.  

Having said that, if anyone sees issues or has suggestions with my setup, I would appreciate the feedback.