HPE Community
LAN Routing
1849294 Members
7988 Online
104042 Solutions
New Discussion

HPE 1920s 48G

 
Madson
Occasional Contributor

‎04-13-2018 09:56 AM - edited ‎04-17-2018 03:27 AM

‎04-13-2018 09:56 AM - edited ‎04-17-2018 03:27 AM

HPE 1920s 48G

Dear, good afternoon.

I have 1 HPE 1920s 48g L3 switch with 4 vlans doing routing with each other normally.
I have a Sonicwall NSA 2600 firewall where switch port 48 is connected to NSA x0 port with ip 172.16.11.253/24.

My problem is that everything in vlan 5 the accesses the NSA  but the other vlans do not reach it. Could you help me with how to make this connection?

I already put the port in trunk, with all the vlans tagged, with Vlan 5 untaggede too tagged, I already put ip only on port 48 and nothing worked.

VLAN 2:
IP-10.0.0.254/29
Doors 1-5 Unttaged
VLAN 3:
IP - 192.168.168.254/24
Doors 6-20 Unttaged
VLAN 4:
IP - 172.16.10.254/24
Doors - 21-42 Unttaged
VLAN 5 -
IP - 172.16.11.254/24
Doors - 43-48

NSA 2600 - 

X0 -  172.16.11..253/24

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.