Routing between VLAN in 5406

[NicolasBosIT]

Hi,

I do make a configuration on a 5406 switch in stack.

My customer wants 5 vlans like this :

VLAN 10 AC / 10.1.10.0 / 255.255.255.0 / 10.1.10.254
VLAN 20 Printers / 10.1.20.0 / 255.255.255.0 / 10.1.20.254
VLAN 30 Servers site 1 / 10.1.30.0 / 255.255.255.0 / 10.1.30.254
VLAN 35 Servers site 2 / 10.1.35.0 / 255.255.255.0 / 10.1.35.254
VLAN 999 LAN / 192.168.2.0 / 255.255.255.0 / 192.168.2.254

The PVID is 999

The IP of my router is 192.168.2.1 and its gateway is 192.168.0.1

When my computer is in the range 192 (in vlan 999), I can go to internet and I can ping the gateway of all vlans
But when I fix my ip in the vlan 10 (per example 10.1.10.10) and I fix my GW in 10.1.10.254, I can't ping 192.168.2.1 and  8.8.8.8.

Do I write a route between the vlan 10 and vlan 999 ?

Thanks for your information and sorry for my poor english.

Nicolas

[Vince-Whirlwind]

You need to add routes to your router as follows:
10.1.10.0/24 --> 192.168.2.254
10.1.20.0/24 --> 192.168.2.254
etc....

[NicolasBosIT]

Thanks for your answer ;)

Sorry for the delay :(

Regards,

Nicolas