getting the pen working on tc1100 tablet

[dave trimnell]

I have loaded linux (Fedora core 1, and experimented with both 2.4.25 and 2.6.4 kernels) onto a tc1100 tablet, but am having trouble getting the pen to work

in windows it shows up as a serial port, irq 4, address 0x300 (hanging off the Intel 82801DBM LPC Interface Controller).

I've tried setserial but this does not work.

Any ideas?

[Stuart Browne]

Some URLS (which probably won't make you happy):

http://www.theory.bham.ac.uk/staff/schofield/linux/tc1100/
http://sourceforge.net/mailarchive/forum.php?thread_id=3656333&forum_id=19621
http://sourceforge.net/mailarchive/forum.php?thread_id=3666261&forum_id=19621

The WacomLinux Sourceforge project (where the last two come from) is probably the best to watch, as they seem to have a decent grasp on what's going on.

It seems as if you've gotten as far as they have.

Unfortunately, the one of these we have at the office I can't put linux on it (co-workers would get very distressed), so can't help more than this :(

Sorry.

[dave trimnell]

thanks stuart, i'd found those as well (been trawling the net for the last week); like you say, not happy reading at the moment.
Its a nice piece of kit, but if we can't get it working - we wont be buying any of them (currently got 2 on loan from HP).

I've got other irons in the fire, so hopefully might get some responses.

again, thanks for the reply, even though it wasnt good news :-(