3CRWER100-75: Wrong firmware to upgrade

[quentinpa]

I am trying to upgrade the router 3CRWER100-75, and I get this message:



Wrong firmware to upgrade

The version of code you have attempted to download is not compatible with this device. Please check and try again !



I have tried with the 3 upgrades in 3COM web page:



3CRWER100_200_V1_2_1_ww

3CRWER100_200_V1_3_0_ww

3crwer100_200-75_v1_3_06_WW



I have SW release 1.2 at the moment

I need to upgrade the router because I am getting low throughput while using L2TP, and it seems that this issue is fixed with the upgrade to 1.3

[zudde]

I get the exact same message when I try to upgrade. The only difference is that I have the 3CRWER200-75 router.

What to do??

[FernandoRaphael]

i have this problem


my router send the message of error when try upgrade o firmware, somebody have a solution ?


the software in my router  is 1.3ww

[cnssumrall]

I also have the 3CRWER200-75 and can't get the firmware to update, as anybody had any success?

[Techno]

What browser are you using ? What firware do you haev on your router and to which version are you upgrading ?

Try both IR and Firefox in case of Java Script issues.

The Tech Man Has Spoken....

[Techno]

If it does not work on IE or Firefox, you can trey the following, make sure you are connected to the router of course:

1- Download the latest firmware from the website, unpack it to have the BIN file, the EXE or ZIP will not be accepted.

1- Press the reset button for 30 sconds, this will delete the firmware totally off

2- Fix your PC to IP address 192.168.1.2 , subnet 255.255.255.0 and Gateway 192.168.1.1, DNS use 192.168.1.1

3- Open browser and go to 192.168.1.1

In the Emergency page that you will find, upload the new firmware by browsing to the fiemware you downloaded and selecting it.

By doing the 30 seconds reset, you are deleting the older firmware from the router and there is No DHCP server on the router, hence the need to use Fixed IP address on your PC.

The Tech Man Has Spoken....

[Techno]

3CRWER200 and 3CRWER100 are very much the same, only difference is WI-FI Speed , 100 is 54Mbps while 200 is 108Mbps

Read my other post about instructions

The Tech Man Has Spoken....

[t1000]

 I successfully applied 3CRWER100_200_V1_2_1_ww. But couldn't get the rest to work. I pressed the reset button for more than 30 seconds, but the firmware wasn't deleted. It just boots back up. 

Please advise, thank you.

[Ottoturbo]

Where can the firmware for this router be downloaded? 3com url for download doesn't work. Could someone send me the firmware file? tulleball@hotmail.com  Thanks.

http://www.3com.com/products/en_US/result.jsp?selected=all&sort=effdt&order=desc&sku=3CRWER100-75

[Ottoturbo]

HP is requesting a SAID to get access to software download and of course this is not something i have having purchased a 3com product before the take over.

[Ottoturbo]

Anyone? I desperately need the 1.3.06 fw

[Techno]

HP name for this is : JE463A

3Com had 1.3.14 for this router, HP has not placed it online (yet)

Your best bet is to contact Support requeting the firmware, they shoudl oblige due to lack on online resources.

I will try and uplad it here, not sure if it will allow such a thing.

Fingers Crossed.

[Ottoturbo]

I installed 1.3.14ww, but now WPA2 encrcyption doesn't work, only WEP and WPA. I want to go back to 1.3.06 to run WPA2.

[mhd2011]

i solved my problem by this link:

https://h10145.www1.hp.com/Downloads/SoftwareReleases.aspx?ProductNumber=JE463A&lang=en&cc=us&prodSeriesId=4175643

thanks

[Ottoturbo]

Excellent, thanks.

[Ottoturbo]

WPA2 encryption now works again with 1.3.06 unlike with 1.3.14.

[Readworth]

And again the link doesn't work....

please help

[saariko]

If any one can still help here.

I have upgraded to 3.14, and since, my wireless isn't working + the router does not keep any settings.

I have tried the 30 seconds reset button, but it's not working.

How can I proceed?

[Csibi]

Hello,

I have same problem. (I can't use the the WPA2 + I often lose my net connection.) Unfortunatelly I haven't got the older firmware version (1.3.06). Could you give me this or a site where I can download it?

Thanks!