controller teaming with vlan-range configuration

[temuri426]

hello

   I have configured teaming with two MSM760.  have two VSC's one of which  have vlan-range option enabled and second VSC is with one vlan. 

  with single vlan VSC i didn't have any problem, but i have connectivity problem with second VSC(with vlan-range). clients are getting ip addresses, but they couldn't reach even their gateways. also at this time team ip and primary wlc is not accessible.

  I have also opened support case, HP engineer told  me that teaming and vlan range usage together is not supported. 

 Our task is to have redundancy - teaming  and no huge broadcast domains, because i use several vlans.

     If someone has the same task, please give me any HP supported solution....

[temuri426]

Hello again, 

did anybody here used teaming , one sssid and vlan range-ranges together? 

i dont believe that if i will team 5 controllers i have to use only one huge subnet for users...   HP guys help :)

[dverl]

From what I understand you have to set a users 'home network/vlan' by passing the correct RADIUS attribute for the desired VLAN.

[temuri426]

hello dverl,

i'm not using radius server for vlan assignment,  just created network profiles with vlan ranges. 

i am interested if anyone uses such configuration, or how well does it works?

thanks