MSM710 radius problem

[tjo099]

Hello.

We have a MSM710 controller. We have 2 broadcasted networks "A" and "B".

Wlan A have RADIUS auth via computer name in. So if a computer is located in our Active Directory under a computer OU the machine is automatically authenticated to connect to the network.

This does not work for our handheld devices like iPad, phones etc. So we have set up another wlan B for that purpose. The auth method is via Radius and checks if the supplied credentials when connecting to that network is existing in our AD if it is, the user is granted access and gets IP-adress etc. The problem is that we now only get this error in the MSM710 log:

• Feb 22 13:44:04 warning iprulesmgr Discarding RADIUS Access Reject (id='135') as it cannot be associated with a previous RADIUS Request.

• Feb 22 13:39:35 warning scdpmgrd [CFG] IP address of the primary controller is not configured. Controller discovery will not work.

• Feb 22 13:39:25 err confighandler Unable to add statically configured IP route inside table 5: 512

So is this something that can be fixed? It used to work, now the wlan B is all dead.

Thomas

P.S. This thread has been moevd from Communications, Wireless (Legacy ITRC forum) to MSM Series. - Hp Forum Moderator

[Ali_Moghrabi]

Hello,

I'm having the same problem, did you manage to fix it? 

i'm getting "IP address of the primary controller is not configured. Controller discovery will not work", everytime I try to connect to the network.