MSM760 - Cannot team and trouble associating AP's

[Björn van den Heuvel]

I'm installing a team of two MSM760 controllers at a customer, servicing 30 MSM422 access points.

I've updated both MSM760's to the latest firmware (5.5.1.0-01-9677).

On the primary access controller I've enabled teaming and set it as team manager.

On the secondary access controller, I've enabled teaming and did not set a team manger.
The primary controller detects the secondary almost right away. When I authenticate it, the secondary controller remains at the "Establishing tunnel" phase.

This morning I had this exact same problem while adding two new accesspoints. After associating them with the secondary accesscontroller (which was still stand-alone then), I could associate them with the primary.

I get the following errors on my primary controller:
Apr 12 23:37:24 err webs SG0023N00R ReadAndAllocAPCfgList: error reading AP
Apr 12 23:37:23 err webs SG0023N00R Last message repeated 4 times
Apr 12 23:36:48 err webs SG0023N00R ReadAndAllocAPCfgList: error reading AP
Apr 12 23:36:48 warning maestro_mas SG0023N00R [00:25:61:91:30:36] SC has failed to connect in time



I get the following errors on my secondary controller:
Apr 12 23:40:43 err maestro_sla Error fetching http://10.250.10.10:4999/cert/sign: The requested URL returned error: 404 (22)
Apr 12 23:40:37 err maestro_sla Last message repeated 2 times
Apr 12 23:40:04 err maestro_sla Error fetching http://10.250.10.10:4999/cert/sign: The requested URL returned error: 404 (22)
Apr 12 23:40:02 err maestro_sla Last message repeated 2 times

P.S. This thread has been moved from Communications, Wireless (Legacy ITRC forum) to MSM Series. - Hp Forum MOderator