problem with 3crwer300

[vgiacchina]

Hi,

i work in a hotel, this hotel has four level, in these level thare are 4 acceppoint.

sometimes the accesspoint are loop, and is necessary a restart.

The configuration for levels are same, uniform sid and channell

level 1

192.168.0.1 Essid: Firstlevel channell:11

192.168.0.2 Essid: Firstlevel channell:11

192.168.0.3 Essid: Firtlevel channell:11

192.168.0.4 Essid: Firtlevel channell:11

We not use this routers as router, but only access point.

is it possible that same essid enad channell are create problems ?

I think that is not possibile, bat not are more to think.

Help me please, and sorry my bad english

[Publipress]

Better to use different, non-overlapping channels (see: http://www.wi-fiplanet.com/tutorials/article.php/972261)

to avoid/minimize interferences.

And, upgrade the firmware of devices to the last release!

OK for the same ESSID.

You can also try the WDS (Wireless Distribution System) feature (see: http://www.dd-wrt.com/wiki/index.php/WDS_Linked_router_network)

Regards