Problems with E-MSM430 APs

[ipacharley]

Hello -

I am new to HP switches and wireless. I am having problems with my Access Points (I think) or it may be the switches. In any event, the below configuration is what is on the Pro Curve. Port 14 is where the AP is connected. MY AP is in autonomous mode.

vlan 1
name "DEFAULT_VLAN"
untagged 5-9,11-17,19-46,Trk1-Trk2,Trk5-Trk7
ip address 192.168.99.4 255.255.255.0
no untagged 3-4,18
exit
vlan 199
name "ShopFloor"
untagged 3-4,18
ip address 192.168.199.1 255.255.255.0
ip helper-address 192.168.199.6
tagged Trk1-Trk2,Trk5-Trk7
exit

I keep getting the following error in the logs of the AP, which made me think there was an issue with the authentication settings on the AP.

Date Level Program Message
Jan 28 11:58:55 debug mgetdate Failed SNTP time synchronization using server mzdrdc01.marzetti.com
Jan 28 11:58:45 debug mgetdate Failed SNTP time synchronization using server 1.colubris.pool.ntp.org
Jan 28 11:58:20 debug mgetdate Failed SNTP time synchronization using server 0.colubris.pool.ntp.org
Jan 28 11:58:13 info webs Someone is already logged in. Retry later.
Jan 28 11:56:55 debug mgetdate Failed SNTP time synchronization using server mzdrdc01.marzetti.com
Jan 28 11:56:45 debug mgetdate Failed SNTP time synchronization using server 1.colubris.pool.ntp.org
Jan 28 11:56:20 debug mgetdate Failed SNTP time synchronization using server 0.colubris.pool.ntp.org
Jan 28 11:54:55 debug mgetdate Failed SNTP time synchronization using server mzdrdc01.marzetti.com
Jan 28 11:54:42 debug mgetdate Failed SNTP time synchronization using server 1.colubris.pool.ntp.org
Jan 28 11:54:16 debug mgetdate Failed SNTP time synchronization using server 0.colubris.pool.ntp.org
Jan 28 11:52:51 debug mgetdate Failed SNTP time synchronization using server mzdrdc01.marzetti.com
Jan 28 11:52:41 debug mgetdate Failed SNTP time synchronization using server 1.colubris.pool.ntp.org
Jan 28 11:52:16 debug mgetdate Failed SNTP time synchronization using server 0.colubris.pool.ntp.org
Jan 28 11:52:16 warni kernel r1v1 is not WPA2 AES/CCMP
Jan 28 11:52:16 warni kernel r2v1 is not WPA2 AES/CCMP
Jan 28 11:52:16 warni kernel r1v2 is not WPA2 AES/CCMP
Jan 28 11:52:16 warni kernel r2v2 is not WPA2 AES/CCMP
Jan 28 11:52:16 debug eapolserver Updating interface information ifname=wvlan1 radio_ifname=r2v2
Jan 28 11:52:16 debug eapolserver Updating interface information ifname=wvlan0 radio_ifname=r1v2
Jan 28 11:52:15 debug eapolserver Updating interface information ifname=wvlan1 radio_ifname=r2v1
Jan 28 11:52:15 debug eapolserver Updating interface information ifname=wvlan0 radio_ifname=r1v1
Jan 28 11:52:15 warni kernel Using 2Mbps for G protection frames in 802.11nbg for radio 2
Jan 28 11:52:15 info rfmgr_ap (2) WIRELESS_set_multicast_rate=0
Jan 28 11:52:15 info rfmgr_ap WIRELESS_set_max_associated_station=0
Jan 28 11:52:15 info rfmgr_ap WIRELESS_set_station_detection_state=0
Jan 28 11:52:15 debug kernel ACK RANGE: Set ackTimeoutUsec:64 ackCtsTimeoutUsec:48
Jan 28 11:52:15 info rfmgr_ap ApplyOnlyAckRange=0
Jan 28 11:52:15 debug rfmgr_ap Setting ACK range to 0km on wvlan1
Jan 28 11:52:15 info rfmgr_ap WIRELESS_set_rts=0
Jan 28 11:52:15 info rfmgr_ap Apply radio ON parameters on wvlan1
Jan 28 11:52:14 warni kernel r2v1 is not WPA2 AES/CCMP
Jan 28 11:52:14 warni kernel r2v2 is not WPA2 AES/CCMP

[HEKnet]

Hello. The only error, I see here is that your AP cannot reach the time server. But you give too little information to find the root of the problem. First, what exactly is your problem? Really the time server?

[Ratchapas]

What is a IP management of your AP? Is the subnet 192.168.199.x/24?
Can you access to Web GUI of AP?
By default IP management of AP is 192.168.1.1/24.