Adding additional disk to MSA 2040

[rcrc]

While adding physical disk to MSA 2040. It gives error "A PHY was disabled." 

[SUBHAJIT KHANBARMAN_1]

@rcrc 

The event related to PHY was disabled can be for empty slot or defective slot. You need to go through details of event ID 274 from below guide to get details and recommendations,

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03791995 (page no 41)

After the installation of new drive if the error goes away and you get event ID 275 then this is absolutely fine.

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*************************************************************************