como activo puertos de msa 2042 de FC a iscsi

[Jonny_Cabrera]

Tengo la msa 2042 la cual por defecto estan habilitados para   FC quiero habilitar a iscsi  de la controladora 1 los puertos 3 y 4 , pero en el modo grafico  no se puede

I have the msa 2042 which by default are enabled for FC I want to enable isci of the controller 1 ports 3 and 4, but in the graphical mode can

[HPSDMike · Accepted solution]

To change ports to iSCSI mode, run the following from the command line:

To make ALL ports iSCSI

• set host-port-mode iSCSI noprompt

For mixed mode (makes ports 1,2 FC and 3,4 iSCSI)

• set host-port-mode FC-and-iSCSI noprompt

These settings effect the ports on both controllers.