connect MSA2050 to San switch and server

[Poolip]

hi Guys
i have 3 dl380 g9-2 San Switch-3 MSA 2050
i want to connect these to each other.i connect the cable  to storage and server as image bellow

but now traffice just troght san switch 1
i want to use all port of MSA to use all speef of my port(8 Gig FC)
please guide me thank you

[giladzzz]

Hi

MSA is not active-active only one controller works for each pool.

you should connect port-1 of controller A and controller B to one switch

and port-2 of both controllers to the other switch.

from the server just connect 2 ports to each switch.

and you need to zone each server port with both ports of each MSA.

Regards

give a KUDO if this helps

[Cali]

You don't tell about the OS and MPIO Settings.
For example ESX use "Fixed Path" by default and this result in using only one Path.

Cali

[Poolip]

os is esx
i want to use all port in server and msa  to get more speed

[Poolip]

@Cali  @giladzzz 

how to zone server port?