HPE Community
MSA Storage
1847758 Members
3124 Online
104013 Solutions
New Discussion

Re: EVA 5000 - Presenting a disk and Secure Path does not work.

 
Denis Belanger
Occasional Contributor

‎10-04-2006 05:00 AM

‎10-04-2006 05:00 AM

EVA 5000 - Presenting a disk and Secure Path does not work.

I have a DL380 server with Windows 2003 Enterpise server SP1. Secure path 4.0c. Once I present the disk everything looks good on the SAN poertion but the OS still sees 4 disks instead of just two. Secure Path does not seem to be doing it's job.

Any help would be great.

Thanks
0 Kudos
Reply
2 REPLIES 2
Uwe Zessin
Honored Contributor

‎10-04-2006 06:37 PM

‎10-04-2006 06:37 PM

Re: EVA 5000 - Presenting a disk and Secure Path does not work.

That is possible if you have installed the Workgroup Edition of Secure Path - you need to install the 'Enterprise' version
or the EVA5000 is running VCS V4 firmware - you need to install the correct MPIO DSM instead of Secure Path.
.
0 Kudos
Reply
Denis Belanger
Occasional Contributor

‎10-05-2006 02:57 AM

‎10-05-2006 02:57 AM

Re: EVA 5000 - Presenting a disk and Secure Path does not work.

Thank you very much, it worked right away. For some reason we had a copy of Secure Path for Workgroup.

Thanks Guys
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.