HPE Community
MSA Storage
1833726 Members
2741 Online
110063 Solutions
New Discussion

how to check if SSP is enabled or disabled.

 
Metin Pasaoglu
Occasional Contributor

‎06-30-2008 03:43 PM

‎06-30-2008 03:43 PM

how to check if SSP is enabled or disabled.

Hi,

I wonder, if there is a way to connect MSA1000 without ACU. I need to check, is SSP is enabled or disabled.

I cant see MSA1000 from server side, on switches I can see connected ports.
0 Kudos
Reply
1 REPLY 1
James Muell
Valued Contributor

‎07-02-2008 05:37 AM

‎07-02-2008 05:37 AM

Re: how to check if SSP is enabled or disabled.

If you have the black MSA cable you can connect to the controller(s) via the port on the front. Use a laptop and HyperTerm or other prog. Its a serial connection so you will need to set the params 19200, no,8,1, no flow i think. Hit the enter a couple times and type show support -all or...show tech_support. Pipe the output to file. the details should show if the acls are setup.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.