HP H241 in gen 8 server

[EduRuizBlas]

Good, would it be possible to install a h241 controller on a gen 8 server? in the compatibility matrix is ​​not supported but I need to connect the server to a 1050 msa booth by sas connection

thanks

[SUBHAJIT KHANBARMAN_1]

You haven't mentioned Operating System installed in the server. So if I assume ESX6.5 then H241 is supported with Gen 8 Server which is Compatible with MSA1050. Please find the SPOCK link to get the details,

https://h20272.www2.hpe.com/SPOCK/Content/ExportPDFView.aspx?Id=95096&typeId=2&lang=en&cc=in&hpappid=117135_SPOCK_PRO_HPE

You can also refer the below forum where it's mentioned that H241 used in Gen 8 server and this is working fine with MSA1050,

https://community.hpe.com/t5/MSA-Storage/DL360pG8-with-P431-and-MSA-1050-SAS/m-p/7015554#M12071

Note: In order to access HPE SPOCK you need HPE Passport login

Hope this helps!
Regards
Subhajit

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************************