MSA 1000 Performance Problem

[Christian Bieletzki]

We are experiencing the same problem and use QLOGIC FC adapters. The registry parameters are the same as in the attachment above except the

"Start"=dword:00000004

one. On our servers it is:

"Start"=dword:00000001

Does anybody have more details about the "Enable Advanced Performance" option? Does it require a reboot? Do one have to enable this for all attached servers on the SAN or can it be per LUN?

Kind regards
Christian

[Jason Keane]

Hi Christian,

Yes, the enable advanced performance option requires a reboot.

Why are you looking at the registy keys. Are you not running Windows 2003? If so the option is available in device manager under the disks themselves.

Jason.

[Christian Bieletzki]

Hi Jason,

yes, indeed. Thank you for that information. I have already seen it but I was asking for the reg values because I was confused why we have only one entry that is differen. I wanted to investigate what this START parameter is for and how it effects the system in changing it. I think that are different things we are talking about.

Regards
Christian

[Simon Leib_1]

Hi Jason,
I'm having the same issue as yourself and have a case logged with HP.
When you said you recieved a patch for MSA 1000, was the patch for the QLogic HBA or the MSA1000 device listed under system devices?
I've updated my MSA 1000 firmware to 4.48 and the QLogic HBA driver to 9.0.2.11 (August 05) but not having any luck.

Any help would be appreciated!