MSA 1014 : no web access

[spbest971]

Hello,

i have a MSA 1040 in prod. everything seems ok. I have 2 DL380 connected and VMWARE running ok.

But the web access is down. i can ping one of the contoller. and i can open a ssh connexion. I would like to know, if i can reload a service to reenable my web access. I can't afford to restart every thing as we are in production 24/24 until June.

[giladzzz]

Hi

if you can connect with SSH you can try to restart the MC (management controller ) this is none distruptive

another option is to physiclly take one controller out and wait for it to startup.

if this works then you can restart the other controller too

Regards

Give a KUDO if this helps

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

[JonPaul]

@spbest971 
Also you can disable and re-enable the protocols:
CLI>  set protocol https <enabled/disabled>

CLI> show protocols