MSA SSH2 Password Certification

[Account1]

Hi,

For the MSA 2060, does anyone know the procedure for setting up SSH2（SSH） password authentication permission?

regards,

[support_s]

System recommended content:

1. HPE MSA 1060/2060/2062 CLI Reference Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[venkat_y]

Hello@Account1,
To set up or enable secure shell (SSH) protocol:
command: set protocols ssh enabled ssh-port <specify the port number>
The secure protocols HTTPS or SSH are used on a management host that is remotely connected to the network port of a controller module over a LAN. while enabling SSH, we have to specify the port. the default port is 22. 

Please refer to the links below for information about how to set up SSH:
HPE MSA 1060/2060/2062 Storage Management Guide: https://support.hpe.com/hpesc/public/docDisplay?docId=a00128580en_us (Page 42&43)
HPE MSA 1060/2060/2062 CLI Reference Guide: https://www.hpe.com/psnow/doc/a00105313en_us (Page 226)

Hope this helps!
Reagrds,
Venkat

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.