MSA2050 0 MB Available Storage

[AB_FIDA]

Hello ALL,

my MSA2050 is composed of 11 disks (1,2 TB raid5 and two spares) as a result of 2 volumes 4399,9 GB each one; first one has allocated 277 GB and the second one 1966,3 GB, so there is enough free space and all operation seem to be right.

But, if I take a look to MSA2050 home page I can see as "Acailable Storage" 0.0 MB, why this result ?

Regards

Alberto

[SUBHAJIT KHANBARMAN_1]

Please share the SMU home page screenshot. It will be good if you can mark the area where you are getting Available Space Zero MB

Also please share the below outputs,

show pools

show disk-groups

show volumes

show drives

show snapshots type all

show snapshot-space

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*************************************************************************

[AB_FIDA]

Here are details:

[SUBHAJIT KHANBARMAN_1]

Actually I was looking for "Capacity Information" from the Home Page screen.

You can go to Home Page and below of the page you can hover your mouse pointer and Capacity Information will pop up. Please share that information.

As per my understanding "Available Storage"  which you see as 0.0MB now will be same as "Unused" in "Capacity Information".

As per CLI outputs it's clear that you have approx 7.3TB space left.

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*************************************************************************

[AB_FIDA · Accepted solution]

Here are capacity information:

[Torsten.]

I think this looks OK.

There is all capacity allocated to the pool, there is no unused space.

[AB_FIDA]

Thank you for your support !

Regards

Alberto