HPE Community
MSA Storage
1820882 Members
3476 Online
109628 Solutions
New Discussion

MSA60 Migration P410i to P441

 
MRelange
Visitor

‎11-21-2016 03:08 AM

‎11-21-2016 03:08 AM

MSA60 Migration P410i to P441

Hello,
We have an HP MSA60 bay currently connected to a ProLiant DL380 G6 server and a SmartArray P410i controller.
We purchased a new ProLiant DL360 G9 server with a SmartArray P441 controller. We want to connect the MSA60 bay to this new controller.
Do you know if this is possible and is done automatically or if you need to do other manipulations so that it sees logical volumes and data?
Thank you in advance.

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎11-22-2016 05:58 AM

‎11-22-2016 05:58 AM

Re: MSA60 Migration P410i to P441

The new P441 controller works with 12Gb/s and is supported with D2000, D3000 and D6000 disks cahssis.

Your MSA60 is old and works with 3Gb/s.

It is surely not supported, but may work, but slooowly.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.