HPE Community
MSA Storage
1850551 Members
3423 Online
104054 Solutions
New Discussion

Re: P2000 G3 iSCSI

 
Paul11
Occasional Visitor

‎09-14-2016 06:50 AM

‎09-14-2016 06:50 AM

P2000 G3 iSCSI

I have a failed drive that have been replaced.

The current status of the drive is "AVAIL"

I wanted to add it as a dedicated spare to my VDISK running RAID10

If I do this will I loose the data on the VDISK?

0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

‎09-14-2016 07:24 AM

‎09-14-2016 07:24 AM

Re: P2000 G3 iSCSI

The status AVAIL is normal for a new disk. Now select the vdisk and make it a dedicated spare.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Paul11
Occasional Visitor

‎09-14-2016 09:27 AM

‎09-14-2016 09:27 AM

Re: P2000 G3 iSCSI

Will I loose data on that vdisk?

0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎09-14-2016 09:33 AM

‎09-14-2016 09:33 AM

Re: P2000 G3 iSCSI

No. Why should you loose data when adding a spare?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.