HPE Community
MSA Storage
1847696 Members
5154 Online
110265 Solutions
New Discussion

P2000G3 MSA Controller CompactFlash error

 
Vadim_85
New Member

‎09-26-2017 02:02 AM

‎09-26-2017 02:02 AM

P2000G3 MSA Controller CompactFlash error

Hello,

I have a problem with controller A into HP P2000 G3 FC/iSCSI.  It doesn`t work after a power outage.

A year ago was the same, but after the controller was pulled out and inserted after a long time - it started to work. But not now.  One of the main problems is that controller does not see a compactflash. I took compactflash out and checked it on the computer - works.

In the attachment files with screenshots of the controller status. Pleace.

Please specify how to solve this problem without replacing the entire controller?

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎09-26-2017 06:00 AM

‎09-26-2017 06:00 AM

Re: P2000G3 MSA Controller CompactFlash error

in case this is the only problem you have, check the firmware of the array and replace the flash card, if needed.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.